LEXAN(沙伯基礎)515RU/PC(聚碳酸酯)物性表參數
責任編輯：admin發表時間：2020-04-20 02:55:00
沙伯基礎SABIC塑料LEXAN 515RU聚碳酸酯（PC）是一種可注射成型的非氯化和非溴化阻燃級，填充10％玻璃纖維, 它采用紫外線穩定，額定值為UL94 V0@1.5mm，有多種不透明顏色可供選擇, 這是LEXAN 503R，503R，503RS，505RU，513RS的替代品。
 |
沙伯基礎SABIC塑料LEXAN 515RU PC物性表參數PDF文檔下載 |
以下是LEXAN(沙伯基礎)515RU/PC(聚碳酸酯)物性表參數
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| MECHANICAL | ||||
| Tensile Stress, yield, 5 mm/min | 60 | MPa | ISO 527 | |
| Tensile Stress, break, 5 mm/min | 45 | MPa | ISO 527 | |
| Tensile Strain, yield, 5 mm/min | 5 | % | ISO 527 | |
| Tensile Strain, break, 5 mm/min | 10 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 3800 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 100 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 3600 | MPa | ISO 178 | |
| Tensile Stress, yld, Type I, 5 mm/min | 63 | MPa | ASTM D 638 | |
| Tensile Stress, brk, Type I, 5 mm/min | 48 | MPa | ASTM D 638 | |
| Tensile Strain, yld, Type I, 5 mm/min | 3 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 5 mm/min | 12 | % | ASTM D 638 | |
| Tensile Modulus, 5 mm/min | 3930 | MPa | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 108 | MPa | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 3520 | MPa | ASTM D 790 | |
| Hardness, Rockwell M | 85 | - | ASTM D 785 | |
| Hardness, Rockwell R | 124 | - | ASTM D 785 | |
| IMPACT | ||||
| Izod Impact, unnotched 80*10*3 +23°C | NB | kJ/m² | ISO 180/1U | |
| Izod Impact, unnotched 80*10*3 -30°C | 130 | kJ/m² | ISO 180/1U | |
| Izod Impact, notched 80*10*3 +23°C | 10 | kJ/m² | ISO 180/1A | |
| Izod Impact, notched 80*10*3 -30°C | 8 | kJ/m² | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 10 | kJ/m² | ISO 179/1eA | |
| Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm | 9 | kJ/m² | ISO 179/1eA | |
| Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m² | ISO 179/1eU | |
| Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm | 130 | kJ/m² | ISO 179/1eU | |
| Izod Impact, notched, 23°C | 106 | J/m | ASTM D 256 | |
| Izod Impact, unnotched, 23°C | NB | J/m | ASTM D 4812 | |
| THERMAL | ||||
| Vicat Softening Temp, Rate A/50 | 150 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/50 | 141 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 143 | °C | ISO 306 | |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 140 | °C | ISO 75/Be | |
| HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 132 | °C | ISO 75/Ae | |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 132 | °C | ISO 75/Af | |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 140 | °C | ISO 75/Bf | |
| CTE, 23°C to 80°C, flow | 4.45E-05 | 1/°C | ISO 11359-2 | |
| CTE, 23°C to 80°C, xflow | 9.27E-05 | 1/°C | ISO 11359-2 | |
| Relative Temp Index, Elec | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 130 | °C | UL 746B | |
| CTE, -40°C to 40°C, flow | 4.70E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 40°C, xflow | 6.40E-05 | 1/°C | ASTM E 831 | |
| Specific Heat | 1.21 | J/g-°C | ASTM C 351 | |
| Thermal Conductivity | 0.2 | W/m-°C | ASTM C177 | |
| PHYSICAL | ||||
| Density | 1.26 | g/cm³ | ISO 1183 | |
| Mold Shrinkage on Tensile Bar, flow | 0.4 | % | SABIC method | |
| Mold Shrinkage, flow, 3.2 mm | 0.3 | % | SABIC method | |
| Melt Volume Rate, MVR at 300°C/1.2 kg | 9 | cm³/10 min | ISO 1133 | |
| Water Absorption, (23°C/sat) | 0.31 | % | ISO 62 | |
| Moisture Absorption (23°C / 50% RH) | 0.13 | % | ISO 62 | |
| ELECTRICAL | ||||
| Volume Resistivity | 1.0E+15 | Ohm-cm | IEC 60093 | |
| Comparative Tracking Index | 175 | V | IEC 60112 | |
| Comparative Tracking Index (UL) {PLC} | 3 | PLC Code | UL 746A | |
| High Amp Arc Ignition, 0.8 mm | 0 | PLC Code | UL 746A | |
| High Amp Arc Ignition, 1.5 mm | 0 | PLC Code | UL 746A | |
| High Amp Arc Ignition, 3.0 mm | 0 | PLC Code | UL 746A | |
| Hot-wire Ignition, 0.8 mm | 1 | PLC Code | UL 746A | |
| Hot-wire Ignition, 1.5 mm | 1 | PLC Code | UL 746A | |
| Hot-wire Ignition, 3.0 mm | 0 | PLC Code | UL 746A | |
| High Voltage Arc Track Rate {PLC} | 3 | PLC Code | UL 746A | |
| Arc Resistance, Tungsten {PLC} | 7 | PLC Code | ASTM D 495 | |
| FLAME CHARACTERISTICS | ||||
| UL Recognized, 94-5VA Flame Class Rating | 3.0 | mm | UL 94 | |
| UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 | |
| Glow Wire Flammability Index 960°C, passes at | 0.8 | mm | IEC 60695-2-12 | |
| Glow Wire Ignitability Temperature, 0.8 mm | 825 | °C | IEC 60695-2-13 | |
| UV-light, water exposure/immersion | F1 | - | UL 746C | |
| Injection Molding | ||||
| Drying Temperature | 120 | °C | ||
| Drying Time | 3-4 | hrs | ||
| Maximum Moisture Content | 0.02 | % | ||
| Melt Temperature | 290-320 | °C | ||
| Nozzle Temperature | 280-310 | °C | ||
| Front - Zone 3 Temperature | 290-320 | °C | ||
| Middle - Zone 2 Temperature | 280-310 | °C | ||
| Rear - Zone 1 Temperature | 270-300 | °C | ||
| Hopper Temperature | 60-80 | °C | ||
| Mold Temperature | 80-120 | °C |
溫馨提示：
本物性表參數提供者不承擔任何法律責任，建議在選擇材料前，就數據值與塑膠材料廠商進行驗證。版權歸原作者所有，如有侵權請立即與我們聯系.
